Sew-It

with Di Kendall

Working together with Janome - Red Block

Blog

Blog Archive

My Favourite Binding

By Di, Dec 21 2018 03:09PM

I really don't like trying to stitch both sides of a bound edge at the same time, equally I'm not a fan of preparing the folded and pressed binding either! If I want an edge where you see the binding on both sides I do it in two processes, opening out one edge of the binding, stitching in the crease, then folding the binding and either machining or slip stitching the second edge..


Another problem with applying bias binding is making sure the finished edge is actually on the stitching line. You need to cut off the seam allowance before stitching the bias strip or the armhole or neck edge will be too small.

I'm going to show you the method I prefer for binding an edge on both woven and knit fabrics.


Cut bias strips twice the width of the finished binding plus seam allowances. For knit fabrics cut the strip from across the width of the fabric.


Click HERE to see how to join bias strips together.


Fold the binding in half with the long cut edges together. Press the folded edge.


Machine through both layers of the binding 1mm inside the seam allowance. I use the machine foot to help, keeping the edge an even distance from the fold. If you prefer, you can place the folded edge against the edge of the foot and adjust the needle position.


Place the binding onto the right side of the garment. The line of machining should be about on the stitching line of the garment. Pin in place and tack if you prefer.

Machine through all 3 layers with the needle position immediately to the left of the stay stitching on the binding. Trim the seam to 5mm.

Press the binding and the seam allowance away from the garment. Understitch through the binding and the allowances, very close to the seam.

Press the binding to the inside and stitch close to the folded ede.

This gives a line of top stitching on the right side.

If you want the binding to show on the right side.

Put the binding against the wrong side of the garment. I prefer not to understitch so there's only one line of stitching visible on the binding.

5 comments
Dec 21 2018 07:04PM by Camomile

Thanks for the great tip.

Dec 23 2018 12:10AM by Wendy Peck

Should this: "1mm inside the seam allowance" be 10mm? Great method.

Dec 23 2018 12:44AM by Kathy Archibald

Love your work

May 17 2019 09:47PM by Teresa A. Ballesteros

I want to follow you through e-mail. Do you send it when you write a new post?
I admire your way of teaching
Thanks from Spain, Europe

Jun 11 2019 08:41PM by diofheage

Thank you so much for asking. I don't keep a mailing list, but I am on Bloglovin where you can be notified of my latest post.

Add a comment
* Required
RSS Feed

Web feed

Sewing advice and tips

Simple pattern alteration for a side seam pocket

Use your overlocker to make buttonhole loops

20160811_151311 (2) commended_blogger_feature

The Savile Row Coat